Now again, the Chinese manufacturer has produced relatively a bit small 3d printer known as Creality CR-10 Mini. In September 2017, the manufacturer creality has launched an incredible 3d printer which is almost like the Creality CR-10 Mini.
As it showed that the manufacturer is cashing on the popularity of the super popular CR-10, therefore, they rolled over the new version CR-10 Mini on the market read also da Vinci 3D printers.
Similarly, the manufacturer has claimed that the CR-10 mini has all the abilities to produce and deliver best 3d printing models. Let’s find out the reality in this Creality CR-10 mini 3D printer review.
It is right to say this Creality CR-10 Mini is not-so-small as it is equipped and incorporated with the features and specs to the become a winner. However, CR-10 mini is smaller than CR-10 but it features some added functionality, therefore, it might hold a slightly smaller printing area but at the same time it brings some newer features.
With this mini but not-so-small 3d printer you can print even large models as this printer offer a huge print volume of 300x220x300 mm. As like CR-10, CR-10 mini is also equipped with a heated print bed, LCD control as well as aluminum extrusion construction.
If someone looking for the same quality of CR-10 at a low price then CR-10 mini is the perfect 3d printer for all those. The CR-10 mini is the 3D printer which performs detail and good printing as well as produces good quality prints at varying and satisfied speed.
It is equipped with high precision imported Aluminum V-slot Bearing along with precision roller as well as it’s high positioning accuracy are responsible to let model move smoothly and print faster.
Creality3d CR-10mini 3D Printer with Resume Print
- Design and looks
The Creality CR-10 Mini has complete metal frame along with the entire acrylic base to better support, stability, and smoothness showing in print models. The compact yet sleek design of 3D printer is impressive as well as the frame is durable enough.
Moreover, the CR10 mini has made with the more simplified structure to make a sure easy adjustment and instant assembly that altogether save your energy and time. Also, the advanced technology used to manufacture CR10 mini delivers enhanced reliability and stability.
Additionally, with CR-10 mini the quality of parts has been upgraded by using improved build quality techniques. The CR-10 mini’s frame has not built with 3D printing components instead of this maker’s used aluminum rods and injection-molded parts.
While the rest mechanical parts have been like to the CR-10 and Creality CR-10S 3d printer.
- Easy to put together
This CR-10 mini comes pre-assembled, even though the printer has been sold as a kit 3D printer. This CrealityMini comes partially pre-assembled and hardly you would need just a couple of minutes to start off printing.
Mostly 3d printers require hectic setup but to assemble this CR10 mini is a lot easier and convenient. Besides, you need to boost your 10 min to put together the printer by simply joining up a few parts along and all done.
- Print quality & Printing process
The Creality CR-10 Mini features a standard Bowden extruder hot end. The mini 3d printer designed for good printing results, therefore, the manufacturer uses Industrial-grade PCB which allow continuous printing for 200 hours without any pressure.
This is the mature and advanced printing technology that also offers smooth, stable and detail performance.
Furthermore, its all-metal frame and acrylic base also add on great stability – although the features like linear bearings and v-slot aluminum extrusions as well enhance the print results from better to good.
On the other hand, the 3d printer features the finest print accuracy of -/+ 0.1mm along with a print speed from average 80mm/s to a maximum of200 mm per second.
Lastly, automatic calibration, a variety of filament compatibility and heated bed overall and together increase the level of detailing in prints. Likewise, these essential features of the 3d printer also bring broad deal of versatility.
- Filament type: PLA, ABS, PETG, TPU, special filaments
- Build speed: 80 to 200mm/sec
- Build volume: 300 x 220 x 300mm
- Product dimension: 4190 x 420 x 500mm
- Compatible Software: Linux, Windows, OSX Layers Software: Cura, Repetier-host, Simplify 3D
- Technology: FDM (Fused Deposition Modeling), a single extruder
- Nozzle diameter: 4mm (can be changed to 0.3 or 0.2mm)
- Layer resolution: 1-0.4mm
- Print using phone
This 3d printer supports both online and offline printing, all you need to connect the device to the printer. You can even use standalone or smartphone to operate CR-10 mini. In addition, this all-new feature is the top notch and most relevant that you can print or operate printer directly from your phone.
- Removable glass bed
It features a removable glass bed to pluck off the print model from the bed. Moreover, the maker incorporates with a spool of Kapton tape as an option to those who do not want to directly print on the bed.
Also, CR-10 mini features a heated-bed which allows users to operate with ease as well as experiment printing using lots of materials.
- Software and Connections
The Creality CR-10 Mini offer great compatible with a variety of software to get your desired print models in any way possible. Such software for CR-10 Mini is compatible with include Linux, Windows, and OSX Layers Software: Repetier-host, Cura, Simplify 3D.
Besides, this mini 3d printer offers only micro SD card slot to connect the printer to the device.